Excellent quality Maleic Anhydride/acrylic Acid - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung
Excellent quality Maleic Anhydride/acrylic Acid - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung Detail:
The capacity of high tenacity high modulus PVA fiber is 15 ktpa，which features high tenacity, high modulus, low elongation, excellent dispensability, alkali resistance, affinity for cement, and etc. It will provide the concrete and mortar with such properties as anti-cracking, impermeability, reinforcement, tenacity, anti-impact, abrasion resistance, frost-resistance, and so on. It can also be used as reinforcing material for plastic products.
High Strength and High Modulus PVA Fiber is to use polyvinyl alcohol (PVA) as the main raw material, made by wet spinning process.
The product has a high modulus, high strength, low elongation, pollution-free, non-toxic, and with acid, alkali, salt, abrasion, sunlight, corrosion, enzymes borers, cracking, anti-penetration, anti-UV, antiaging properties.
The essential characteristic of these reinforcements is to absorb and distribute throughout the entire length – and thus attenuate – the tensions that are created in the material by an external load applied to the object
|
Product name
|
PVA Fiber
|
|
Diameter
|
2.0+/-0.5 dtex
|
|
Length
|
4mm, 6mm 12mm…
|
|
Tensile Strength
|
>11.5cn/dtex
>13.0cn/dtex
|
|
Modulus
|
290+/-10 cn/dtex
>300 cn/dtex
|
|
Elongation
|
7% max.
|
Performance
1. It is with the purpose of high modulus, high strength, alkali and acid resistance, heat resistance. It also has good compatibility with cement and other macromolecule material.
2. It is mainly used in construction and cement industry, such as cement board, non asbestos material for heat and attrition resistance,plastic and rubber reinforcement.
3. It is the good substitution of a/sb/estos.
4. Dosage: fiber:cement=1:50 by weight
Suitable Project
MAIN GRADES：
|
GRADE |
Q-13 |
Q-14 |
Heavy Denier |
Filament series |
|
|
Linear |
2.0dtex |
2.0dtex |
15.0dtex |
1000-2000dtex |
|
|
Cut length |
4/6/12mm |
4/6/12mm |
4/6/12mm |
- |
|
|
Average tenacity |
13.3cN/dtex |
14.2 cN/dtex |
- |
- |
|
|
Typical tenacity |
12.5 cN/dtex |
14 cN/dtex |
11 cN/dtex |
12.5 cN/dtex |
|
|
Average modulus |
305 cN/dtex |
328 cN/dtex |
- |
- |
|
|
Typical modulus |
280 cN/dtex |
320 cN/dtex |
300 cN/dtex |
300 cN/dtex |
|
Product detail pictures:
Related Product Guide:
INTERVIEW: Conygar Investment Company Well positioned to capitalise on future opportunities | Chinese Methyl Acrylate (Ma) Supplier
Vinyl Acetate Monomer Market to cross USD 10 billion by 2024: Global Market Insights, Inc. | Chinese Methyl Acrylate (Ma) Supplier
Our firm since its inception, normally regards item top quality as company life, constantly make improvements to generation technology, improve product excellent and repeatedly strengthen organization total good quality management, in strict accordance with the national standard ISO 9001:2000 for Excellent quality Maleic Anhydride/acrylic Acid - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung , The product will supply to all over the world, such as: Provence , Guatemala , Montreal , Providing the best products, the most perfect service with the most reasonable prices are our principles. We also welcome OEM and ODM orders.Dedicated to strict quality control and thoughtful customer service, we are always available to discuss your requirements and ensure full customer satisfaction. We sincerely welcome friends to come negotiate business and start cooperation.
By Nora
from Brasilia
- 2016.02.18 15:54
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Betty
from Uruguay
- 2016.01.28 19:59