Massive Selection for Chinese Glacial Acetic Acid - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung
Massive Selection for Chinese Glacial Acetic Acid - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung Detail:
The capacity of high tenacity high modulus PVA fiber is 15 ktpa，which features high tenacity, high modulus, low elongation, excellent dispensability, alkali resistance, affinity for cement, and etc. It will provide the concrete and mortar with such properties as anti-cracking, impermeability, reinforcement, tenacity, anti-impact, abrasion resistance, frost-resistance, and so on. It can also be used as reinforcing material for plastic products.
High Strength and High Modulus PVA Fiber is to use polyvinyl alcohol (PVA) as the main raw material, made by wet spinning process.
The product has a high modulus, high strength, low elongation, pollution-free, non-toxic, and with acid, alkali, salt, abrasion, sunlight, corrosion, enzymes borers, cracking, anti-penetration, anti-UV, antiaging properties.
The essential characteristic of these reinforcements is to absorb and distribute throughout the entire length – and thus attenuate – the tensions that are created in the material by an external load applied to the object
|
Product name
|
PVA Fiber
|
|
Diameter
|
2.0+/-0.5 dtex
|
|
Length
|
4mm, 6mm 12mm…
|
|
Tensile Strength
|
>11.5cn/dtex
>13.0cn/dtex
|
|
Modulus
|
290+/-10 cn/dtex
>300 cn/dtex
|
|
Elongation
|
7% max.
|
Performance
1. It is with the purpose of high modulus, high strength, alkali and acid resistance, heat resistance. It also has good compatibility with cement and other macromolecule material.
2. It is mainly used in construction and cement industry, such as cement board, non asbestos material for heat and attrition resistance,plastic and rubber reinforcement.
3. It is the good substitution of a/sb/estos.
4. Dosage: fiber:cement=1:50 by weight
Suitable Project
MAIN GRADES：
|
GRADE |
Q-13 |
Q-14 |
Heavy Denier |
Filament series |
|
|
Linear |
2.0dtex |
2.0dtex |
15.0dtex |
1000-2000dtex |
|
|
Cut length |
4/6/12mm |
4/6/12mm |
4/6/12mm |
- |
|
|
Average tenacity |
13.3cN/dtex |
14.2 cN/dtex |
- |
- |
|
|
Typical tenacity |
12.5 cN/dtex |
14 cN/dtex |
11 cN/dtex |
12.5 cN/dtex |
|
|
Average modulus |
305 cN/dtex |
328 cN/dtex |
- |
- |
|
|
Typical modulus |
280 cN/dtex |
320 cN/dtex |
300 cN/dtex |
300 cN/dtex |
|
Product detail pictures:
Related Product Guide:
3D Printing News Briefs: June 6, 2017 | 3DPrint.com | Chinese Methyl Acrylate (Ma) Supplier
OTCMKTS:KURRY | Chinese Water Soluble Pva Fiber Supplier
Dedicated to strict high-quality management and considerate purchaser support, our experienced employees members are usually available to discuss your specifications and be certain full shopper satisfaction for Massive Selection for Chinese Glacial Acetic Acid - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung , The product will supply to all over the world, such as: Jordan , Amsterdam , Auckland , We set a strict quality control system. We have return and exchange policy, and you can exchange within 7 days after receive the wigs if it is in new station and we service repairing free for our products. Please feel free to contact us for further information and we will offer you competitive price list then.
By Antonio
from Belgium
- 2016.10.23 10:29
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Eleanore
from Cape Town
- 2016.11.11 11:41