Rapid Delivery for Ginshicel Ethylene Vinyl Acetate Emulsion - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung
Rapid Delivery for Ginshicel Ethylene Vinyl Acetate Emulsion - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung Detail:
The capacity of high tenacity high modulus PVA fiber is 15 ktpa，which features high tenacity, high modulus, low elongation, excellent dispensability, alkali resistance, affinity for cement, and etc. It will provide the concrete and mortar with such properties as anti-cracking, impermeability, reinforcement, tenacity, anti-impact, abrasion resistance, frost-resistance, and so on. It can also be used as reinforcing material for plastic products.
High Strength and High Modulus PVA Fiber is to use polyvinyl alcohol (PVA) as the main raw material, made by wet spinning process.
The product has a high modulus, high strength, low elongation, pollution-free, non-toxic, and with acid, alkali, salt, abrasion, sunlight, corrosion, enzymes borers, cracking, anti-penetration, anti-UV, antiaging properties.
The essential characteristic of these reinforcements is to absorb and distribute throughout the entire length – and thus attenuate – the tensions that are created in the material by an external load applied to the object
|
Product name
|
PVA Fiber
|
|
Diameter
|
2.0+/-0.5 dtex
|
|
Length
|
4mm, 6mm 12mm…
|
|
Tensile Strength
|
>11.5cn/dtex
>13.0cn/dtex
|
|
Modulus
|
290+/-10 cn/dtex
>300 cn/dtex
|
|
Elongation
|
7% max.
|
Performance
1. It is with the purpose of high modulus, high strength, alkali and acid resistance, heat resistance. It also has good compatibility with cement and other macromolecule material.
2. It is mainly used in construction and cement industry, such as cement board, non asbestos material for heat and attrition resistance,plastic and rubber reinforcement.
3. It is the good substitution of a/sb/estos.
4. Dosage: fiber:cement=1:50 by weight
Suitable Project
MAIN GRADES：
|
GRADE |
Q-13 |
Q-14 |
Heavy Denier |
Filament series |
|
|
Linear |
2.0dtex |
2.0dtex |
15.0dtex |
1000-2000dtex |
|
|
Cut length |
4/6/12mm |
4/6/12mm |
4/6/12mm |
- |
|
|
Average tenacity |
13.3cN/dtex |
14.2 cN/dtex |
- |
- |
|
|
Typical tenacity |
12.5 cN/dtex |
14 cN/dtex |
11 cN/dtex |
12.5 cN/dtex |
|
|
Average modulus |
305 cN/dtex |
328 cN/dtex |
- |
- |
|
|
Typical modulus |
280 cN/dtex |
320 cN/dtex |
300 cN/dtex |
300 cN/dtex |
|
Product detail pictures:
Related Product Guide:
Establishment of feeder-free culture system for human induced pluripotent stem cell on DAS nanocrystalline graphene | Sinopec Pp Pe Ps Abs Factory
Corning Incorporated (GLW) Q4 2018 Earnings Conference Call Transcript — The Motley Fool | Sinopec Pp Pe Ps Abs Factory
Our crew through skilled training. Skilled skilled knowledge, strong sense of company, to meet the company wants of customers for Rapid Delivery for Ginshicel Ethylene Vinyl Acetate Emulsion - HIGH TENACITY HIGH MODULUS PVA FIBER – Haitung , The product will supply to all over the world, such as: Sao Paulo , Sao Paulo , Macedonia , Our company always concentrate on the development of the international market. We've got a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
By Constance
from Danish
- 2016.04.18 16:45
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
By Nancy
from Japan
- 2015.09.29 13:24