-
VINYL ACETATE-ETHYLENE COPOLYMER EMULSION
VAE Vinyl acetate-ethylene copolymer emulsion (VAE Emulsion) is a copolymer of vinyl acetate and ethylene.we able to supply VAE products with viscosity of 200～8500 mPa.s, ethylene content of 2～30％ and mass fraction of non-volatile matter at 50～60％. VAE emulsion can be used in base material of adhesives、sizing material、paper pulp sizing and varnishing material、base material of coating、cement modifier、carpet adhesive, etc. Product Application Base Material of Adhesiv... -
WATER SOLUBLE PVA FIBER
WATER SOLUBLE PVA FIBER The capacity of water soluble fiber is 19 ktpa. S-9、S-8、SS-7、SS-4、 SS-2 fiber represents our water soluble products with respective dissolving temperature of 90℃、80℃、70℃、40℃、20℃.The products can be used in cotton spinning, linen spinning. Wool spinning and silk spinning in pure or blend. The blended fiber or carrier yarn, pure water soluble yarn and non-woven fabric are well sold in the world. MAIN GRADES Grade ... -
HIGH TENACITY HIGH MODULUS PVA FIBER
PVA FIBER High strength high modulus PVA fiber or PVA high-fiber has excellent performances, such as high strength, high modulus, heat resistance, corrosion resistance, UV resistance, excellent impact resistance and adhesion which is subjected to a process of dissolution, spinning, heat-setting, cutting and baling to form a high-strength, high-modulus fiber. This high-strength, high-modulus PVA fiber can disperse quickly and easily in the mortar and concrete mix after being added into th... -
-
SIS(Styrene-isoprene-styrene block copolymer)
PROPERTIES AND APPLICATIONS Styrene-isoprene block copolymers (SIS) are large volume, low priced commercial thermoplastic elastomers (TPE) which are produced by living ionic copolymerization by sequentially introducing styrene, 2-methyl-1,3-butadiene (isoprene), and styrene into the reactor. The styrene content typically varies between 15 and 40 percent. When cooled below the melting point, SIS’s with a low styrene content phase-separate into nano-sized polystyrene spheres imbedded in an... -
SEBS(Styrene Ethylene Butylene Styrene)
PROPERTIES AND APPLICATIONS Styrene-ethylene-butylene-styrene, also known as SEBS, is an important thermoplastic elastomer (TPE) which behaves like rubber without undergoing vulcanization.SEBS is strong and flexible, has excellent heat and UV resistance and is easy to process. It is produced by partial and selective hydrogenating of styrene-butadiene-styrene copolymer (SBS) which improves the thermal stability, weathering and oil resistance, and makes SEBS steam sterilisable.However, hy... -
SBS(styrene –butadiene block copolymer)
PROPERTIES AND APPLICATIONS Styrene-butadiene block copolymers are an important class of synthetic rubbers. The two most common types are linear and radial triblock copolymers having rubber center blocks and polystyrene end blocks. SBS elastomers combine the properties of a thermoplastic resins with those of butadiene rubber. The hard, glassy styrene blocks provide mechanical strength and improve the abrasion resistance, while the rubber mid-block provides flexibility and toughness. In m... -
Vinyl Acetate Monomer
Product Detail:Vinyl Acetate Monomer Properties: Colorless and transparent liquid with aromatic smell. Flash point: -8℃, density: 0.932g/cm3, slightly soluble in water, soluble in most organic solvents, easily react by addition with chlorine, bromine and ozone. By the action of heat light, peroxide and catalyst, free radical polymerization will take place. Category 3 dangerous good, low flash point inflammable liquid (originally class 1 inflammable liquid), explosion limit: 2.6～ 13.4%(v/... -
Polyvinyl Alcohol
PRODUCER:SINOPEC PVA has many exceptional properties such as water solubility, fiber-forming property, adhesiveness, film-forming property, emulsion stability, dispersion stability, resistance to oil, acid, and alkali, chemical reactivity, biodegradability, as well as meltability (or thermoplasticity) and many unique and special properties through modification.PVA is widely used in many industries like textile, papermaking, construction, chemicals, printing, packaging, pharmaceuticals, deterg... -
VAE emulsion
We supply VAE products with viscosity of 200～8500 mPa.s, ethylene content of 2～30％ and mass fraction of non-volatile matter at 50～60％. VAE emulsion can be used in base material of adhesives、sizing material、paper pulp sizing and varnishing material、base material of coating、cement modifier、carpet adhesive, etc. Base Material of Adhesive VAE emulsion can serve as the base... -
CNPC Kunlun Paraffin Wax
Paraffin waxes are separated from crude oil during the production of light(distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 1% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less than 0.5% oil and have been hydro treated or clay ... -
HIGH TENACITY HIGH MODULUS PVA FIBER
The capacity of high tenacity high modulus PVA fiber is 15 ktpa，which features high tenacity, high modulus, low elongation, excellent dispensability, alkali resistance, affinity for cement, and etc. It will provide the concrete and mortar with such properties as anti-cracking, impermeability, reinforcement, tenacity, anti-impact, abrasion resistance, frost-resistance, and so on. It can also be used as reinforcing material for plastic products. Product Description ...
Hello, come to consult our products !