-
Methyl Acetate
As a green solvent, methyl acetate is exempted from restriction and used as organic solvent in manufacturing ester, coating, ink, paint, adhesives and leather; and acts as foaming agent for polyurethane foam, further, it can also be used as an extractant for oil and grease in the production of artificial leather, fragrance, and etc. In response to increase of market demand，the capacity of the methyl acetate plant is 210ktpa. Applications: ... -
Triacetin (Food Grade)
Triacetin (Food Grade) CAS NO.: 102-76-1 EINECS/ ELINCS NO.: 203-051-9 E Code: E1518 FEMA: 2007 Synonyms: Glycerol Triacetate, 1,2,3 Propanetriol Triacetate Molecular Formula: C9H14O6 Molecular Weight: 218.21 Constitutional Formula: CH3COOCH2CH(CH3COO)CH2(CH3COO) Applications: 1.Tobacco industry( as plasticizer for cigarette filter rods) 2. Flavour and essences( as fixer ) 3. Dairy goods(as emulsifier) 4 Food additive( such as in hard candy, butter and beverage) 5. Chewing gum( as plasticize... -
SINOPEC PPH-Y1500
Polypropylene is widely used for the production of melt blown and composite nonwoven fabrics forhygiene, medical, sorbent, filtration and other markets. Sinopec Ultra-High Melt Flow PP resins are all pelletized and have been tailored for melt blown processing. Advantages of PPH-Y1500(N) UHMF resin for fine fibers: ➢ Pelletized form for handling, cleanliness and consistency. ➢ Tertiary Butyl Alcohol (TBA) free formulation ➢ Exceptional processing on most melt blown machinery PPH-Y1500 featur... -
IPA (Isopropyl Alcohol)
Product Detail:Vinyl Acetate Monomer Properties: Colorless and transparent liquid with aromatic smell. Flash point: -8℃, density: 0.932g/cm3, slightly soluble in water, soluble in most organic solvents, easily react by addition with chlorine, bromine and ozone. By the action of heat light, peroxide and catalyst, free radical polymerization will take place. Category 3 dangerous good, low flash point inflammable liquid (originally class 1 inflammable liquid), explosion limit: 2.6～ 13.4%(v/... -
1.4 Butanediol (BDO)
Product properties: the molecular weight is 90.12,colorless oily shape combustible liquid,hygroscopicity and taste bitter.When temperature below the freezing point,getting to needle crystal,with freezing point of 20.1℃ boiling point 235℃,and flash point(open) 121℃,relative density 1.017,lit temperature of 393.9,refractive index of 1.446 Uses: ... -
Vinyl Acetate Monomer
Product Detail:Vinyl Acetate Monomer Properties: Colorless and transparent liquid with aromatic smell. Flash point: -8℃, density: 0.932g/cm3, slightly soluble in water, soluble in most organic solvents, easily react by addition with chlorine, bromine and ozone. By the action of heat light, peroxide and catalyst, free radical polymerization will take place. Category 3 dangerous good, low flash point inflammable liquid (originally class 1 inflammable liquid), explosion limit: 2.6～ 13.4%(v/... -
Polyvinyl Alcohol
PRODUCER:SINOPEC PVA has many exceptional properties such as water solubility, fiber-forming property, adhesiveness, film-forming property, emulsion stability, dispersion stability, resistance to oil, acid, and alkali, chemical reactivity, biodegradability, as well as meltability (or thermoplasticity) and many unique and special properties through modification.PVA is widely used in many industries like textile, papermaking, construction, chemicals, printing, packaging, pharmaceuticals, deterg... -
VAE emulsion
We supply VAE products with viscosity of 200～8500 mPa.s, ethylene content of 2～30％ and mass fraction of non-volatile matter at 50～60％. VAE emulsion can be used in base material of adhesives、sizing material、paper pulp sizing and varnishing material、base material of coating、cement modifier、carpet adhesive, etc. Base Material of Adhesive VAE emulsion can serve as the base... -
CNPC Kunlun Paraffin Wax
Paraffin waxes are separated from crude oil during the production of light(distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 1% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less than 0.5% oil and have been hydro treated or clay ... -
HIGH TENACITY HIGH MODULUS PVA FIBER
The capacity of high tenacity high modulus PVA fiber is 15 ktpa，which features high tenacity, high modulus, low elongation, excellent dispensability, alkali resistance, affinity for cement, and etc. It will provide the concrete and mortar with such properties as anti-cracking, impermeability, reinforcement, tenacity, anti-impact, abrasion resistance, frost-resistance, and so on. It can also be used as reinforcing material for plastic products. Product Description ... -
WATER SOLUBLE PVA FIBER
The capacity of water soluble fiber is 19 ktpa. S-9、S-8、SS-7、SS-4、SS-2 fiber represents our water soluble products with respective dissolving temperature of 90℃、80℃、70℃、40℃、20℃.The products can be used in cotton spinning, linen spinning. Wool spinning and silk spinning in pure or blend. The blended fiber or carrier yarn, pure water soluble yarn and non-woven fabric are well sold in the world. Product Description ... -
Sinopec Paraffin Wax
Paraffin waxes are separated from crude oil during the production of light(distillate) lubricating oils. These waxes are categorized by oil content and the degree of refinement. The crudest versions fall into the slack wax category and contain between 5% to 20% oil. Next on the step of refinement are scale waxes containing between 1% to 5% oil. The highest grade of refinement is the fully refined wax. Fully refined paraffin waxes contain less than 0.5% oil and have been hydro treated or clay ...
Hello, come to consult our products !